产品详情
长期供应NORYL PPO GFN3价格合理,诚信经营,可全国供货(广东省内免费送货上门)。。
“十年老店,完备售后,信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足,发货准时,交期和质量均有保障!
根据客户要求,可提供塑胶原料相关报告。如:ROHS(SGS)报告,UL认证,材质证明及物质安全资料表(MSDS)!
欢迎来电咨询7*24全天候服务热线:13650067339 杨先生 QQ:39448759
2、可作较高温度下使用的齿轮、风叶、阀等零件,可代替不锈钢使用。
3、可制作螺丝、紧固件及连接件。
4、电机、转子、机壳、变压器的电器零件。
lectrical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Volume Resistivity | 7.62e+17 ohm-cm | 7.62e+17 ohm-cm | ASTM D 257 | ||
7.62e+17 ohm-cm | 7.62e+17 ohm-cm | IEC 60093 | |||
Surface Resistance | 1.25e+18 ohm | 1.25e+18 ohm | ROA; IEC 60093 | ||
1.25e+18 ohm | 1.25e+18 ohm | ASTM D 257 | |||
Dielectric Constant |
2.7 @Frequency 1.00e+6 Hz |
2.7 @Frequency 1.00e+6 Hz |
IEC 60250 | ||
2.78 @Frequency 1.00e+6 Hz |
2.78 @Frequency 1.00e+6 Hz |
ASTM D 150 | |||
Dielectric Strength |
34.1 kV/mm @Thickness 3.20 mm |
866 kV/in @Thickness 0.126 in |
in oil; ASTM D 149 | ||
34.1 kV/mm @Thickness 3.20 mm |
866 kV/in @Thickness 0.126 in |
in oil; IEC 60243-1 | |||
Dissipation Factor |
0.0029 @Frequency 1.00e+6 Hz |
0.0029 @Frequency 1.00e+6 Hz |
ASTM D 150 | ||
0.0029 @Frequency 1.00e+6 Hz |
0.0029 @Frequency 1.00e+6 Hz |
IEC 60250 | |||
Comparative Tracking Index | 225 V | 225 V | IEC 60112 | ||
Hot Wire Ignition, HWI | 30 - 60 sec | 30 - 60 sec | PLC 2; UL 746A | ||
High Amp Arc Ignition, HAI | 60 - 120 arcs | 60 - 120 arcs | PLC 1; UL 746A | ||
Thermal Properties | Metric | English | Comments | ||
CTE, linear, Parallel to Flow |
67.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
37.2 µin/in-°F @Temperature -40.0 - 104 °F |
ASTM E 831 | ||
67.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
37.2 µin/in-°F @Temperature -40.0 - 104 °F |
ISO 11359-2 | |||
CTE, linear, Transverse to Flow |
67.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
37.2 µin/in-°F @Temperature -40.0 - 104 °F |
ASTM E 831 | ||
67.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
37.2 µin/in-°F @Temperature -40.0 - 104 °F |
ISO 11359-2 | |||
Deflection Temperature at 1.8 MPa (264 psi) | 124 °C | 255 °F | Flatw 80*10*4 sp=64mm; ISO 75/Af | ||
122 °C @Thickness 3.20 mm |
252 °F @Thickness 0.126 in |
unannealed; ASTM D 648 | |||
Vicat Softening Point | 143 °C | 289 °F | Rate B/50; ASTM D 1525 | ||
143 °C | 289 °F | Rate B/50; ISO 306 | |||
146 °C | 295 °F | Rate B/120; ISO 306 | |||
UL RTI, Electrical | 65.0 °C | 149 °F | UL 746B | ||
UL RTI, Mechanical with Impact | 65.0 °C | 149 °F | UL 746B | ||
UL RTI, Mechanical without Impact | 65.0 °C | 149 °F | UL 746B | ||
Flammability, UL94 |
V-0 @Thickness 1.50 mm |
V-0 @Thickness 0.0591 in |
UL 94 by SABIC-IP | ||
Flame Spread Index |
15 @Thickness 1.52 mm |
15 @Thickness 0.0598 in |
ASTM E 162 | ||
Oxygen Index | 33 % | 33 % | ISO 4589 | ||
Glow Wire Test |
775 °C @Thickness 1.00 mm |
1430 °F @Thickness 0.0394 in |
Glow Wire Ignitability Temperature; IEC 60695-2-13 | ||
775 °C @Thickness 2.00 mm |
1430 °F @Thickness 0.0787 in |
Glow Wire Ignitability Temperature; IEC 60695-2-13 | |||
800 °C @Thickness 3.00 mm |
1470 °F @Thickness 0.118 in |
Glow Wire Ignitability Temperature; IEC 60695-2-13 | |||
960 °C @Thickness 1.50 mm |
1760 °F @Thickness 0.0591 in |
Glow Wire Flammability Index; IEC 60695-2-12 | |||
Debbbbbbive Properties | |||||
Ds_4min | 70 | ISO 5659-2 | |||
F1 Class Smoke and Toxicity Rating | 3 mm | NF F16-101 | |||
Heat Release, MAHRE | 33.6 kW/m^2 | ISO 5660-1 | |||
Lateral Flame Spread, CFE | 20 kW/m^2 | ISO 5658-2 | |||
M1 Flame Class Rating | 2 mm | NF P 92501 | |||
NBS Smoke Density, Flaming, 20 min (3.2 mm) | 120 | ASTM E 662 | |||
NBS Smoke Density, Flaming, 4 min (1.52mm) | 30 | ASTM E 662 | |||
NBS Smoke Density, Flaming, 4 min (3.2 mm) | 30 | ASTM E 662 | |||
NBS Smoke Density, Non-Flaming, 4 min (1.52mm) | 7 | ASTM E 662 | |||
Toxicity | 0 | ISO 5659-2 | |||
Toxicity (3 mm) | 21.76 | NF X70-100 |
PMMA (PMMA # organic glass acrylic Lucite |) /TD5H10/ (Taiwan)
Use: other
Features notes: with excellent toughness
Important bbbbbeters: melt flow rate: 0.8 g/10min density: 1.18 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.6% notched impact strength, flexural modulus of 2.4 MPa hardness: 2900: 88: VEKA softening point debbbbation temperature of 115 DEG C: 97 degrees heat transmittance: 91%
Manufacturer: Lu Cai (Taiwan) Company
PMMA (PMMA # organic glass acrylic Lucite |) /2041/ (Taiwan)
Use: other
Characteristic note: block copolymer, good wear resistance, good color stability, good anti ultraviolet ability, good weather resistance, high slide
TPE (thermoplastic elastomer) 7020-1000/ /P United States Star
Use: other
Features notes: workability, good and good color of soft
Important bbbbbeters: density: 0.898 g/cm3 elongation at break: 930%
Thermoplastic elastomers (thermoplastic elastomer) / Teknor / us Apex om-2368n
Use: other
Important bbbbbeters: melt flow rate: 8 g/10min density: 0.918 g / cubic centimeter, tensile strength: 5.52 MPa elongation at break: 400% hardness: 70
Manufacturers: the United States Apex Teknor company
Thermoplastic elastomers (thermoplastic elastomer) / Teknor / us Apex rv-2235b
Use: other
Important bbbbbeters: melt flow rate: 10 g/10min density: 0.948 g / cubic centimeter, tensile strength: 5.17 MPa elongation at break: 700% hardness: 39
Manufacturers: the United States Apex Teknor company
Thermoplastic elastomers (thermoplastic elastomers) / tc5cht K / Germany
Use: other
Features: high flexibility, good flexibility, good adhesion, good surface finish, good coloring
Important bbbbbeters: density: 0.89 g / cubic centimeter, tensile strength: 10.5 MPa elongation at break: 780% hardness: 50
Manufacturer: Germany plastic Po (kraiburg-tpe) Company
Thermoplastic elastomers (thermoplastic elastomers) / tc6cct K / Germany
Use: other
Characteristics: high flexibility, good flexibility, good adhesion, good surface finish, good coloring
Important bbbbbeters: density: 0.89 g / cubic centimeter, tensile strength: 10 MPa elongation at break: 790% hardness: 60
Manufacturer: Germany plastic Po (kraiburg-tpe) Company
Thermoplastic elastomers (thermoplastic elastomers) / tc6cht K / Germany
Use: other
Characteristics: high flexibility, good flexibility, good adhesion, good surface finish, good coloring
Important bbbbbeters: density: 0.89 g / cubic centimeter, tensile strength: 12 MPa elongation at break: 810% hardness: 60
Manufacturer: Germany plastic Po (kraiburg-tpe) Company
Thermoplastic elastomers (thermoplastic elastomers) / tc7aaz K / Germany
Use: other
Characteristic note: anti UV perbbbbance is good, good adhesion, good mobility, good weather resistance
Important bbbbbeters: density: 1.17 g / cubic centimeter, tensile strength: 8 MPa elongation at break: 700% hardness: 73
Manufacturer: Germany plastic Po (kraiburg-tpe) Company
Thermoplastic elastomers (thermoplastic elastomers) / tc7cct K / Germany
Use: other
Characteristics: high flexibility, good flexibility, good adhesion, good surface finish, good coloring
Important bbbbbeters: density: 0.89 g / cubic centimeter, tensile strength: 12 MPa elongation at break: 790% hardness: 70
Manufacturer: Germany plastic Po (kraiburg-tpe) Company
Thermoplastic elastomers (thermoplastic elastomers) / tc8cht K / Germany
Use: other
Characteristics: high flexibility, good flexibility, good adhesion, good surface finish, good coloring
Important bbbbbeters: density: 0.89 g / cubic centimeter, tensile strength: 16 MPa elongation at break: 780% hardness: 80
Manufacturer: Germany plastic Po (kraiburg-tpe) Company
Thermoplastic elastomers (thermoplastic elastomers) / tc9cht K / Germany
Use: other
Characteristics: high flexibility, good flexibility, good adhesion, good surface gloss, good coloring
Important bbbbbeters: density: 0.89 g / cubic centimeter, tensile strength: 17 MPa elongation at break: 750% hardness: 90
Manufacturer: Germany plastic Po (kraiburg-tpe) Company
Thermoplastic elastomers (thermoplastic elastomers) / tp0ccn K / Germany
Use: other
Characteristics: high flexibility, good flexibility, good adhesion, good surface finish, good coloring
Important bbbbbeters: density: 1.08 g / cubic centimeter, tensile strength: 13 MPa elongation at break: 620% TPE (thermoplastic elastomer) TP0CDN/ /K Germany
Use: other
Characteristics: high flexibility, good flexibility, good adhesion, good surface finish, good coloring
Important bbbbbeters: density: 1.08 g/cm3 tensile strength: 15 MPa elongation at break: 590% hardness: 50
Manufacturer: Germany plastic Po (KRAIBURG-TPE) Company
TPE (thermoplastic elastomer) TP6CCN/ /K Germany
Use: other
Features note: high flexibility, good flexibility, good adhesion, good finish, good coloring
Important bbbbbeters: density: 1.15 g/cm3 tensile strength: 9.5 MPa elongation at break: 740% hardness: 60
Manufacturer: Germany plastic Po (KRAIBURG-TPE) Company
TPE (thermoplastic elastomer) TP7CCN/ /K Germany
Use: other
Features note: high flexibility, good flexibility, good adhesion, good finish, good coloring
Important bbbbbeters: density: 1.15 g/cm3 tensile strength: 10.5 MPa elongation at break: 760% hardness: 70
Manufacturer: Germany plastic Po (KRAIBURG-TPE) Company
TPE (thermoplastic elastomer) TP8CCN/ /K Germany
Use: other
Characteristics: high flexibility, good flexibility, good adhesion, good surface finish, good coloring
Important bbbbbeters: density: 1.13 g/cm3 tensile strength: 11 MPa elongation at break: 730% hardness: 80
Manufacturer: Germany plastic Po (KRAIBURG-TPE) Company
TPE (thermoplastic elastomer) TP9CCN/ /K Germany
Use: other
Features: high flexibility, good flexibility, good adhesion, good surface finish, good coloring
Important bbbbbeters: density: 1.13 g/cm3 tensile strength: 11.5 MPa elongation at break: 680% hardness: 90
Manufacturer: Germany plastic Po (KRAIBURG-TPE) Company
TPE (thermoplastic elastomer) /N93955/ Ningbo three
Use: other
Characteristic remarks: safety and hygiene perbbbbance: allow direct contact with skin and non greasy food.
Important bbbbbeter:
Three Bo polymer alloy (Ningbo) Co., Ltd.
TPE (thermoplastic elastomer) /7004N-PE/ Shanghai oak
Use: other
Characteristic note: injection molding temperature: 200
Important bbbbbeters: melt flow rate: 66.2 g/10min density: 0.99 g/cm3 elongation at break: 525% hardness: 70.5
Taiwan rubber (Shanghai) Industrial Co., Ltd.
TPE (thermoplastic elastomer) /CL-5865/ astrotech polymer
Use: other
Important bbbbbeters: melt flow rate: 25 g/10min density: 1.1 g/cm3 molding shrinkage: 2% tensile strength: 5.5 MPa elongation at break: 600% hardness: 65
Manufacturer: Shangyu city astrotech polymer Co Ltd
/3182-55/ (thermoplastic elastomer) TPE pump polymer
Use: other
Important bbbbbeters: melt flow rate: 17.8 g/10min tensile strength: 3.5 MPa elongation at break: 560% hardness: 55
TPE (thermoplastic elastomer) /HX-080AN (B) / Hunan Chang Sheng
Use: other
Characteristic notes: good tear strength
Important bbbbbeters: density: 0.96 g/cm3 tensile strength: 10.8 MPa elongation at break: 500% hardness: 80 brittleness temperature: -60
Manufacturer: Hunan Chang Sheng Petrochemical Co., Ltd.
TPE (thermoplastic elastomer) /P3991/ Nantong premarin
Use: other
TPE (thermoplastic elastomer) 7360-9000/ /P United States Star
Use: other
Features notes: workability, good weather resistant perbbbbance is good and soft
Important bbbbbeters: density: 1.14 g/cm3 elongation at break: 890%
The United States Star alloy and rubber company
TPE (thermoplastic elastomer) 7370-9000/ /P United States Star
Use: other
Features notes: workability, good weather resistant perbbbbance is good and soft
Important bbbbbeters: density: 1.14 g/cm3 elongation at break: 700%
The United States Star alloy and rubber company
TPE (thermoplastic elastomer) 7375-9000/ /P United States Star
Use: other
Features notes: workability, good weather resistant perbbbbance is good and soft
Important bbbbbeters: density: 1.14 g/cm3 elongation at break: 720%
The United States Star alloy and rubber company
TPE (thermoplastic elastomer) 7380-9000/ /P United States Star
Thermoplastic elastomers (thermoplastic elastomers) / 1302 / US networks and diamonds
Use: other
Important bbbbbeters: melt flow rate: 0.5 g/10min density: 0.902 g / cubic centimeter, molding shrinkage: 4.1% elongation at break: 300% bending modulus: 40.7 MPa
/18367/ (thermoplastic elastomer) TPE pump polymer
Use: other
Important bbbbbeters: density: 0.96 g/cm3 molding shrinkage: 1.5% tensile strength: 7.5 MPa elongation at break: 750% hardness: 70 brittleness temperature: -60
Yinzhou Ningbo New Material Co., Ltd
TPE (thermoplastic elastomer) /6520N-PE/ Shanghai oak
Purpose: adhesive PP
Characteristic note: sticky PP material
Important bbbbbeters: melt flow rate: 17 g/10min density: 1.2 g/cm3 hardness: 65
TPE (thermoplastic elastomer) /C4740/ Nantong premarin
Use: other
Features notes: easy to process color, high transparency, soft, flexible.
Important bbbbbeters: density: 0.91 g/cm3 molding shrinkage: 1% tensile strength: 5.44 MPa elongation at break: 1540% hardness: 40
Manufacturer: Nantong premarin Elastomer Technology Co. Ltd.
TPE (thermoplastic elastomer) /C4850/ Nantong premarin
Use: other
Features notes: easy to process color, high transparency, soft, flexible.
Important bbbbbeters: density: 0.9 g/cm3 molding shrinkage: 1.9% tensile strength: 6.34 MPa elongation at break: 640% hardness: 50
Manufacturer: Nantong premarin Elastomer Technology Co. Ltd.
TPE (thermoplastic elastomer) /C4860/ Nantong premarin
Use: other
Features notes: easy to process color, high transparency, soft, flexible.
Important bbbbbeters: density: 0.9 g/cm3 molding shrinkage: 1.2% tensile strength: 9.52 MPa elongation at break: 404% hardness: 60
Manufacturer: Nantong premarin Elastomer Technology Co. Ltd.
TPE (thermoplastic elastomer) BLACK/ /EE-2265B-01 United States Apex Teknor
Use: other
TPE (thermoplastic elastomer) /C4730/ Nantong premarin
Use: other
Features notes: easy to process color, high transparency, soft, flexible.
Important bbbbbeters: density: 0.91 g/cm3 molding shrinkage: 2.1% tensile strength: 4.73 MPa elongation at break: 1590% hardness: 30
Manufacturer: Nantong premarin Elastomer Technology Co. Ltd.
TPE (thermoplastic elastomer) /C4750/ Nantong premarin
Use: other
Features notes: easy to process color, high transparency, soft, flexible.
Important bbbbbeters: density: 0.91 g/cm3 molding shrinkage: 0.6% tensile strength: 8.67 MPa elongation at break: 1341% hardness: 50
Manufacturer: Nantong premarin Elastomer Technology Co. Ltd.
TPE (thermoplastic elastomer) /C4760/ Nantong premarin
Use: other
Features notes: easy to process color, high transparency, soft, flexible.
Important bbbbbeters: density: 0.91 g/cm3 molding shrinkage: 0.6% tensile strength: 14.46 MPa elongation at break: 1213% hardness: 60
Manufacturer: Nantong premarin Elastomer Technology Co. Ltd.
TPE (thermoplastic elastomer) /C4830/ Nantong premarin
Use: other
Features notes: easy to process color, high transparency, soft, flexible.
Important bbbbbeters: density: 0.89 g/cm3 molding shrinkage: 1.6% tensile strength: 3.81 MPa elongation at break: 587% hardness: 30
Manufacturer: Nantong premarin Elastomer Technology Co. Ltd.
Thermoplastic elastomers (thermoplastic elastomers) / s2850-00 / us noble polymers
Use: other
Characteristics: characteristics: recyclable material appearance: black; available color; natural color
Important bbbbbeters: melt flow rate: 4 g/10min density: 1.15 g / cubic centimeter, tensile strength: 7.86 MPa hardness: 85
Manufacturers: the United States of the noble Polymer Co
Thermoplastic elastomers (thermoplastic elastomers) / 4592n-ne / Shanghai table
Use: other
TPE (thermoplastic elastomer)/TO 113 / CTS in France
Purpose: other
Ozone resistance characteristic remarks: antioxidants Good chemical resistance Alkali resistance to climate impact perbbbbance good acid detergent thermal stability, good
Important bbbbbeters: the hardness: 23
Manufacturer: France CTS corporation
TPE (thermoplastic elastomer)/GL - 6005 / ningbo company
Purpose: other
Feature remark: low density, high liquidity, 60 a hardness, through the ROHS, eighty-four detect nonylphenol etc
Important bbbbbeters:
Manufacturer: ningbo heng billiton macromolecule material co., LTD
TPE (thermoplastic elastomer)/DL - 7002 / ningbo company
Purpose: other
Feature remark: low density, high liquidity, 70 a hardness, through the ROHS, eighty-four detect nonylphenol etc
Important bbbbbeters:
Manufacturer: ningbo heng billiton macromolecule material co., LTD
TPE (thermoplastic elastomer)/S3360A RAVAGO/Belgium
Purpose: other
Important bbbbbeters: the melt flow rate: 8 g / 10 min density: 1.15 g/cm3 tensile strength: 5.69 MPa elongation at break: 780% hardness: brittle temperature: 57 to 60 ℃
Manufacturer: Belgium RAVAGO group
PA6 (polycaprolactam # nylon 6) /4112 FR/ Nycoa
Purpose: automotive components
Characteristic remark: glass fiber reinforced 12%. Perbbbbance characteristics: good size stability, high rigidity, good melt strength, resistance to hydrocarbons, oil resistance, oil resistance, high viscosity, flame retardant.
Important bbbbbeters: density: 1.32 g/cm3 absorption rate: 1% molding shrinkage rate: 0.4% notched impact strength: 130 tensile strength: 75.2 MPa elongation: 15% bending strength: 86.2 MPa flexural modulus: 3030 MPa hardness: 120 thermal debbbbation temperature: 204 degrees
Manufacturers: the United States Nycoa company
PA6 (poly caprolactam, nylon 6 # BRICI) /HN301-G30F/
Purpose: electronic and electrical components
Features: with high heat resistance and rigidity, good weather resistance and other characteristics
Important bbbbbeters: density: 1.38 g/cm3 water absorption: 1.13% molding shrinkage: 0.4% notched impact strength: 12 elongation at break: 3.5% bending strength: 195 MPa hot debbbbation temperature: 200
Manufacturer: Beijing Chemical Industry Research Institute (Enterprise Group)
PA6 (polycaprolactam # nylon 6 /ASN 27300 SR UV/ Nycoa)
Use: other
Characteristic remark: glass fiber reinforced 30%. Perbbbbance characteristics: good size stability, good rigidity, good strength, good chemical resistance, resistance to hydrocarbons, oil resistance, oil resistance.
Important bbbbbeters: density: 1.35 g/cm3 absorption rate: 1.2% molding shrinkage rate: 0.3% notched impact strength: 850 tensile strength: 150 MPa elongation: 3% bending strength: 210 MPa flexural modulus: 7910 MPa hardness: 120 thermal debbbbation temperature: 210 degrees
Manufacturers: the United States Nycoa company
PA6 (polycaprolactam # nylon 6) /PA-213XO12/ chemicals
Use: other
Characteristics: perbbbbance characteristics: copolymer, good impact resistance, good melt strength, good flexibility, good abrasion resistance, thermal stability, good toughness.
PA6 (polycaprolactam # fuyuda plasticizing nylon 6) /PA6-II/
Use: other
Characteristics note: through the mineral filler and glass fiber reinforced modified nylon 6 to improve the heat resistance, mechanical properties and dimensional stability, reduce the molding shrinkage, linear expansion coefficient.
Important bbbbbeters: density: 1.21 g/cm3 notched impact strength: 50 tensile strength: 85 MPa bending strength: 150 MPa bending modulus: 3500 MPa thermal debbbbation temperature: 170
Manufacturer: Cixi City, the prosperity of the plastic Co., Ltd.
PA6 (polycaprolactam # fuyuda plasticizing nylon 6) /PA6-III/
Use: other
Characteristics note: through the mineral filler and glass fiber reinforced modified nylon 6 to improve the heat resistance, mechanical properties and dimensional stability, reduce the molding shrinkage, linear expansion coefficient.
Important bbbbbeters: density: 1.27 g/cm3 notched impact strength: 30 tensile strength: 110 MPa bending strength: 170 MPa bending modulus: 5000 MPa thermal debbbbation temperature: 180
Manufacturer: Cixi City, the prosperity of the plastic Co., Ltd.
PA6 (polycaprolactam # nylon 6) /126F6T3H/ Austria SAX
Use: other
Characteristic remarks: low friction coefficient, high strength, thermal stability, high rigidity, good wear resistance
Important bbbbbeters: density: 1.43 g/cm3 notched impact strength: 10 tensile strength: 150 MPa elongation at break: 3% bending strength: 268 MPa bending modulus: 8100 MPa VEKA softening point: 216 degrees hot debbbbation temperature: 209
Manufacturer: Austria SAX polymer industries, Inc.
PA6 (polycaprolactam # nylon 6) /GF 50 LS/ Slovakia Plastcom
Application: auto parts, electric tool accessories, electronic and electrical components
Features: ultra high toughness, high strength, chemical coupling, good UV resistance
Important bbbbbeters: melt flow rate: 1 g/10min density: 1.55 g/cm3 molding shrinkage: 0.4% notched impact strength: 18 bending strength: 290 MPa bending modulus: 12500 MPa VEKA softening point: 210 degrees hot debbbbation temperature: 210
Manufacturer: Slovakia Plastcom company
PA6 (polycaprolactam # nylon 6) /N603H/ Nixon odd America
Use: other
Features notes: copolymer, anti solubility, good workability, good chemical resistance, fatigue resistance, oil resistance, thermal stability, toughness good particle material
Important bbbbbeters: density: 1.1 g/cm3 water absorption: 1.5% molding shrinkage: 1.2% notched impact strength: 130 elongation at break: 100% bending strength: 82.7 MPa bending modulus: 2070 MPa hot debbbbation temperature: 60
Manufacturer: the United States company of orchid
PA6 (polycaprolactam # nylon 6) /2326 HS/ Nycoa
Usage: wire and cable material
Features: super high toughness, improved impact resistance, good rigidity, high impact resistance, good workability, good chemical resistance, thermal stability, moderate hardness.
Important bbbbbeters: density: 1.06 g/cm3 absorption rate: 1.7% molding shrinkage rate: 1.4% notched impact strength: 880 tensile strength: 45 MPa elongation: 130% bending strength: 58.6 MPa flexural modulus: 1500 MPa hardness: 118 thermal debbbbation temperature: 48.9 degrees
Manufacturers: the United States Nycoa company
PA6 (polycaprolactam # nylon 6) /4014 HST/ Nycoa
Use: other, automotive parts
Characteristic remark: glass fiber reinforced 14%. Perbbbbance characteristics: good dimensional stability, resistance to hydrocarbons, thermal stability, high rigidity, oil resistance, good chemical resistance, oil resistance.
Important bbbbbeters: density: 1.22 g/cm3 absorption rate: 1.1% molding shrinkage rate: 0.5% notched impact PA6 (polycaprolactam # nylon 6) /NST60P75HSL.SPN/ Italy Lan Diqi
Use: other
Characteristic remarks: super high toughness, good flexibility, good chemical resistance, thermal stability
Important bbbbbeters: density: 1.05 g/cm3 water absorption: 1.2% notched impact strength: 1100 tensile strength: 34.5 MPa elongation at break: 150% bending strength: 48.3 MPa bending modulus: 483 MPa thermal debbbbation temperature: 45
Italy orchid Engineering Plastics Co., Ltd.
PA6 (polycaprolactam # nylon 6) /S RCV3015/ Italy Lan Diqi
Use: other
Features: good size stability, low warp, good rigidity, good surface finish, glass bead / glass fiber 30% packing by weight
Important bbbbbeters: density: 1.35 g/cm3 water absorption: 7.9% notched impact strength: 6 tensile strength: 125 MPa elongation at break: 3.8% VEKA softening point: 210 degrees hot debbbbation temperature: 185
Italy orchid Engineering Plastics Co., Ltd.
PA6 (polycaprolactam # nylon 6) /A 2030/212 GF30 IM UV/ Epis
Use: other
Perbbbbance characteristics: improved impact resistance, good UV resistance, thermal stability, high impact resistance, good stripping perbbbbance.
Important bbbbbeters: density: 1.35 g/cm3 notched impact strength: 20 tensile strength: 105 MPa elongation at break: 4% bending strength: 150 MPa bending modulus: 6500 MPa VEKA softening point: 200 degrees hot debbbbation temperature: 200
Epis Plastic Co., Ltd
PA6 (polycaprolactam # nylon 6) /A 3030/220 GB30 UV/ Epis
Use: other
Characteristic remark: glass bead 30%. Perbbbbance characteristics: low warp, good resistance to UV, good fluidity, thermal stability and good stripping perbbbbance.
Important bbbbbeters: density: 1.36 g/cm3 notched impact strength: 4 tensile strength: 55 MPa elongation at break: 5% bending strength: 100 MPa bending modulus: 3500 MPa VEKA softening point: 190 degrees hot debbbbation temperature: 65
Epis Plastic Co., Ltd
PA6 (polycaprolactam # nylon 6 /214 GH/ Teknor Apex)
Use: other
Characteristics: glass fiber reinforced materials, 14% filler by weight, good size stability, high strength, lubrication, good workability, good creep resistance, thermal stability, toughness
Important bbbbbeters: density: 1.23 g/cm3 molding shrinkage rate: 0.5% notched impact strength: 64 oxygen index: 22% tensile strength: 114 MPa elongation: 3% bending strength: 162 MPa flexural modulus of 4310 MPa hot debbbbation temperature: 188 degrees
Manufacturers: the United States Apex Teknor company
PA6 (polycaprolactam # nylon 6 /233 GH/ Teknor Apex)
Use: other
Features: glass fiber reinforced materials, 33% filler by weight, good size stability, high strength, good lubrication, impact resistance, good workability, thermal stability, toughness, good
Important bbbbbeters: density: 1.39 g/cm3 molding shrinkage rate: 0.2% notched impact strength: 140 oxygen index: 22% tensile strength: 169 MPa elongation: 3% bending strength: 8270 MPa flexural modulus of 241 MPa hot debbbbation temperature: 212 degrees
Manufacturers: the United States Apex Teknor company
PA6 (polycaprolactam # nylon 6) /PA B3 G10 V10 NTLA010 NT309/ Petropol in Brazil
Use: other
Characteristics: glass fiber reinforced materials 10% filler by weight, good electrical perbbbbance
Important bbbbbeters: density: 1.19 g/cm3 absorption rate: 1.2% molding shrinkage rate: 0.85% notched impact strength: 75 tensile strength: 100 MPa elongation: 5.5% bending strength: 155 MPa flexural modulus of 4600 MPa hot debbbbation temperature: 155 degrees
Manufacturer: Brazil Petropol Polymer Co
PA6 (polycaprolactam # nylon 6) /PA B3 G25 HS PRTA011 NT355/ Petropol in Brazil
Use: other
Characteristics: glass fiber reinforced materials 25% filler by weight, lubrication, thermal stability
Important bbbbbeters: density: 1.29 g/cm3 absorption rate: 1% molding shrinkage rate: 0.4% notched impact strength: 110 tensile strength: 135 MPa elongation: 3.5% bending strength: 210 MPa flexural modulus of 6500 MPa hot debbbbation temperature: 192 degrees
Manufacturer: Brazil Petropol Polymer Co
PA6 (polycaprolactam # nylon 6) /PA B3 G35 HS PRTA011 NT391 MSP/ Petropol in Brazil
Use: other
Characteristics: glass fiber reinforced materials, 35% filler by weight, good electrical perbbbbance
Important bbbbbeters: density: 1.38 g/cm3 water absorption: 0.9% molding shrinkage: 0.3% notched impact strength: 14 tensile strength: 190 MPa elongation at break: 2.5% bending modulus: 10400 MPa hot debbbbation temperature: 210
Manufacturer: Brazil Petropol Polymer Co
PA6 (poly caprolactam, nylon 6 # BRICI) /HN304-G30/
Purpose: electronic and electrical components
Note: the properties of halogen-free flame retardant phosphorus reinforced materials, 30% glass fiber reinforced, has excellent characteristics of high strength, high electrical properties, heat resistance and impact resistance
Important bbbbbeters: density: 1.38 g/cm3 water absorption: 1.32% molding shrinkage: 0.5% notched impact strength: 15 elongation at break: 6% bending strength: 190 MPa hot debbbbation temperature: 200
Manufacturer: Beijing Chemical Industry Research Institute (Enterprise Group)
为了更好的服务客户,我公司现推出零风险采购方案,你在我公司购买的货物只要发货后10天内。你对货物有任何不满意都可以提出退换申请,在货物未拆封,不影响二次销售的情况下,我司将给你办理退换手续并承担运费,为你免去任何担忧。。